Note: This programmer module is compatible with 10 mm to 14 mm IC body width, we have another variant of this product for 4mm IC body width Click here The new device will vary with the PIC escalating. Master chip retains the DIP package with the seat. Software-compatible with PIC K150 is the Windows98 and Windows2000/NT, Windows XP/windows7/ Windows 8/ Windows 10 operating system. 8 pin-40 pin chip other than through the onboard the ICSP interface online to download software. This is equipped with a 40pin DIP programming Block, direct programming of an 8pin – 40pin DIP chip. (speed average PICSTART + 3-5 times) fully automatic programming checksum. The programming quality is stable and reliable. This supports most popular PIC chips, programmed, readout, encryption, use a high-speed USB communication, fast programming. This option works OK on older operating systems such as Windows XP.The PIC K150 USB Automatic Develop Microcontroller Programmer With ICSP Cable is a low-cost high-performance PIC programmer.

This is due to an issue between the Prolific USB to Serial drivers and the Microbrn software on Windows 7. Please note that on Windows 7, the 'Reset Programmer' option on the 'Programmer' menu may not function correctly. The programming software should now reset your programmer and you are ready to go! Enter the value you noted down earlier and click OK. Click on the 'File' menu, and choose 'Port'.Click on the 'File' menu, and choose 'Programmer'.It will usually fail to reset the programmer the first time it is started - the correct Serial port has not yet been selected. Run the 'microbrn.exe' file in the 'PIC Programmer Software' folder.There will be some text in brackets - such as 'COM3'. There should be an item labelled 'Prolific USB-to-Serial Comm Port'.

Click the + next to 'Ports (COM & LPT)'.

Click on the 'Hardware' tab, and then click on 'Device Manager'.

Go to Start, and right click on 'Computer'.

Run the 'PL2303_Prolific_DriverInstaller_v1.7.0.exe' program in the 'PIC Programmer Drivers' folder to install the driver.

Pin 1 on the ZIF socket is located next to the locking lever. When putting a PIC in the ZIF (Zero Insertion Force) socket, the PIC Programming software will indicate how it should be positioned. The PIC programmer drivers and software are available to download: Download Getting started with your K150 PIC Programmer K150 USB PIC Programmer

K150 pic programmer driver telecharger